Tri5 Sedan Nomad Hardtop Convertible Wagon Frame Swap Tri Five LS3

Nerd Rods Nerd Rods TriFive, Stage 4
TriFive Turn Key Chassis LS3 and Corvette Suspension.
Nerd Rods Stage 4 TFC4 is your all in one kit for the TriFives using the proven Nerd Rods Frame paired up with the GMPP LS3 Connect and Cruise System and everything you need to get your TriFive running down the road. Please read the details below as there are lots of parts not shown and there are lots of options to make sure this is the chassis you need for your project.
Chassis are built to order, not a stock. Stage 4 Running Chassis Includes
Chassis

The Nerd Rods

Fully Welded Nerd Rods Frame

Corvette Suspension Front and Rear

Disk Brakes

Rack and Pinion Steering

QA1 Coil Over Shocks

Nerd Rods Ackerman Kit

Nerd Rods Handling Kit

Dana 44 Upgrade

3.45 Gear Ratios

Limited Slip Differential (Posi Trac)

Stainless Steel Brake Line Kit

Drive Line

LS 3 Connect and Cruise

430 HP LS3 Crate

4L65 4 Speed Automatic Transmission

Torque converter

Wiring, and electronics

Driveline Only

Vintage Air Front Runner Pulleys

Starter

Slip Yoke, and Drive Shaft

Exhaust

Stainless Bros 2.5” Tubing

True X Pipe

Flowmaster Delta 50 Mufflers

V Band Clamps

Vibrant Performance Flex Couplers

V Band Clamps

Nerd Rods Billet Hangers

Stainless Works Isolators

Long Tube Headers, Coated Mild Steel

Cooling

PRC Radiator Core System

Core Support

Radiator

Transmission Cooler

Power Steering Cooler

Dual Fans

Fan Shroud

Recovery Tank

Cap

Upper and Lower Radiator Hose

Steam Lines and Hardware

Clamps, Coolant, and Fittings

Fuel System

Nerd Rods Custom 32 Gallon Fuel tank

32 Gallons

Aluminum

340 LPH Fuel Pump

Sending Unit

Mounting and Hardware

Stainless Hardlines

Aeromotive Regulator

Fragolia Flex Lines

AN Fittings and LS Adapter

Power Steering Lines

AN Power Steering Specific Hoses

AN Fittings

Return Hose

Power Steering Cooler

Corvette Rack Adapters

Steering Linkage

Nerd Rods Steering Linkage Kit

Corvette Spline U Joint

Center U Joint

Mock Up Shaft

DOM Steering Linkage

Other Items

Air Filter

MAF Sensor Adapter

Optima Battery, Yellow Top

Temporary Start Wiring

Trunk Mount Battery Cables

Fired up, leak checked, and running

*Frame show without cooling or wiring. Wheel and Tire Sizes
1988-1996 Suspension with no body modifications

Front

17” minimum wheel diameter

9.5” wide wheel with 7” of back spacing or (+56mm offset)

255/xx/Rxx Front, 10” wide, Tires

Rear

16” minimum wheel diameter

10.5” wide wheel

275/xx/Rxx Front, 11.25” wide, Tires

1988-1996 Suspension with Fender and Rear Tub Modifications and TFC4-HLK Handling Kit

Front

17” minimum wheel diameter

10.5” wide wheel with 8” of back spacing or (+56mm offset)

275/xx/Rxx Front, 11.2” wide, Tires

Rear

16” minimum wheel diameter

11” wide wheel

315/xx/Rxx Front, 12.13” wide, Tires

Chassis are built to order, not a stock. FAQ Q:
The Video shows the chassis with a radiator and running but the photos don't. What will I be getting? A:
The Video shows more of what a customer will receive with minor difference. We are constantly improving our designs, refining out manufacturing capabilities and getting new better venders so there will be some subtle changes but the running turnkey version you see in the video is what you should expect Q:
What else do I need to supply? A:
Wheels and tires for shipping and any additional components you need us to install for you to feel comfortable. Q:
Can I have a different motor and transmission combination? A:
Absolutely, contact us with your needs and we’ll work to get it taken care of but the price will need to be adjusted for any variables. Obviously super chargers need a different pulley belt system and turbo would need a different exhaust system just as an example.
Stage 4 Chassis packed up and waiting for shipping to its new home.
Chassis are built to order, not a stock. Options to make your build go easier.
Jig Tables Like you weld yourself or want less of a frame to customize on your end? We can help.
Stage 1 - Weld it Yourself Kit
Stage 2 - Welded Frame
Stage 3 - Rolling Chassis Have something besides a TriFive you want a DIY Chassis for? We're working on others.
Task Force Trucks - Now Shipping
Sting Ray Corvettes - Design in Progress
Want to see what it looks like finished?
Each photo opens to each cars respective photo gallery.
Don't miss our other chassis and frame options in our Pricetronic store.
Have Questions? Call or Text us at 512-348-6253 or email.